LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Steering System - Coupe) >> Power Steering Gear Box Assembly >> Disassembly And Assembly >> Lubrication And Sealing Points >> Disassembly Service Points >> << B >> Rack Support Cover Removal

<< B >> Rack Support Cover Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Using special tool MB991204, remove the rack support cover from the gear box.

Fig 1: Removing Rack Support Cover
G04539251Courtesy of DAIMLERCHRYSLER CORPORATION