LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Steering System - Coupe) >> Power Steering Gear Box Assembly >> Disassembly And Assembly >> Lubrication And Sealing Points >> Assembly Service Points >> >> O << Tie Rod End/Tie Rod End Jam Nut Installation

>> O << Tie Rod End/Tie Rod End Jam Nut Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Screw in the tie rod end to achieve the right and left length as illustrated. Lock with the jam nut.

Fig 1: Installing Tie Rod End/Tie Rod End Jam Nut
G04539277Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals