LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Steering System - Coupe) >> Power Steering Gear Box Assembly >> Disassembly And Assembly >> Lubrication And Sealing Points >> Assembly Service Points >> >> M << Tab Washer/Tie Rod Installation

>> M << Tab Washer/Tie Rod Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

After installing the tie rod to the rack, fold tab washer end (two locations) to tie rod notch.

Fig 1: Installing Tab Washer/Tie Rod
G04539273Courtesy of DAIMLERCHRYSLER CORPORATION