LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Steering System - Coupe) >> Power Steering Gear Box Assembly >> Disassembly And Assembly >> Lubrication And Sealing Points >> Assembly Service Points >> >> B << Needle Roller Bearing/Ball Bearing Installation

>> B << Needle Roller Bearing/Ball Bearing Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply DIAMOND ATF to housing, bearing and oil seal press fitting surface.
    CAUTION: Press-fit straight. The valve housing is aluminum, and may become deformed if press-fit on an angle.
  2. Press fit needle roller bearing with special tools MB990938 and MB991202.
    Fig 1: Installing Needle Roller Bearing/Ball Bearing
    G04539261Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals