LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Steering System - Coupe) >> On-Vehicle Service >> Ball Joint Dust Cover Inspection

Ball Joint Dust Cover Inspection

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press the dust cover with your finger to check whether the dust cover is cracked or damaged.
  2. If the dust cover is cracked or damaged, replace the tie rod end.
    NOTE: If the dust cover is cracked or damaged, the ball joint could be damaged.