LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Exhaust System - Coupe) >> Exhaust Manifold < 2.4L Engine > >> Removal And Installation >> Removal Service Point >> << A >> Heated Oxygen Sensor (Front) Removal

<< A >> Heated Oxygen Sensor (Front) Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Use special tool MD998770 to remove the oxygen sensor.

Fig 1: Removing Heated Oxygen Sensor
G04539175Courtesy of DAIMLERCHRYSLER CORPORATION