LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Exhaust System - Coupe) >> Exhaust Manifold < 2.4L Engine > >> Removal And Installation >> Installation Service Point >> >> A << Heated Oxygen Sensor (Front) Installation

>> A << Heated Oxygen Sensor (Front) Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Use special tool MD998770 to installation the oxygen sensor.

Fig 1: Installing Heated Oxygen Sensor
G04539176Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals