Removal And Installation
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- *: Indicates parts which should be temporarily tightened, and then fully tightened with the vehicle on the ground in the unladen condition.
- For vehicles with SRS, before removal of steering gear box, refer to RESTRAINTS - COUPE , center the front wheels and remove the ignition key. Failure to do so may damage the SRS clock spring and render the SRS system inoperative, risking serious injury.
Required Special Tools:
- MB990828: Bushing Remover and Installer
- MB991045: Bushing Remover and Installer