LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine Intake System - Coupe) >> Intake Manifold Plenum >> Removal And Installation >> Installation Service Point >> >> A << Intake Manifold Plenum Gasket Installation

>> A << Intake Manifold Plenum Gasket Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Install the gasket with the protrusion in the position illustrated in figure.

Fig 1: Installing Manifold Plenum Gasket
G04538524Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals