LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine Intake System - Coupe) >> Intake Manifold < 3.0L Engine > >> Removal And Installation >> Installation Service Points >> >> B << Intake Manifold Installation

>> B << Intake Manifold Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Coat the intake manifold mounting studs with engine oil.
  2. Tighten the intake manifold mounting nuts by the following procedure.
    TIGHTENING TORQUE SPECIFICATIONS

    ORDER MOUNTING NUTS TIGHTENING TORQUE
    1st Right-bank nuts 6.4 +/- 1.4 N.m (56 +/- 13 in-lb)
    2nd Left-bank nuts 22 +/- 1 N.m (16 +/- 1 ft-lb)
    3rd Right-bank nuts 22 +/- 1 N.m (16 +/- 1 ft-lb)
    4th Left-bank nuts 22 +/- 1 N.m (16 +/- 1 ft-lb)
    5th Right-bank nuts 22 +/- 1 N.m (16 +/- 1 ft-lb)
    Fig 1: Installing Intake Manifold
    G04538530Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals