>> A << Fuel High-Pressure Hose Installation
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Be careful not to allow any engine oil to enter the fuel rail.
- When connecting the fuel high-pressure hose to the fuel rail, apply a small amount of new engine oil to the O-ring and then insert the fuel high-pressure hose, being careful not to damage the O-ring.
- While turning the fuel high-pressure hose to the left and right, install it to the fuel rail.
- Check that the injector turns smoothly. If it does not turn smoothly, the O-ring may be trapped. Remove the fuel high-pressure hose and then re-insert it into the fuel rail and check again.