LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Engine Intake System - Coupe) >> Intake Manifold < 2.4L Engine > >> Inspection >> Intake Manifold Check

Intake Manifold Check

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for damage or cracking of any part.
  2. Check for obstruction of the negative pressure (vacuum) outlet port, and for obstruction of the water passage or gas passage.
  3. Using a straight edge and feeler gauge, check for distortion of the cylinder head installation surface.

    Standard value: 0.15 mm (0.006 inch) or less 

    Limit: 0.20 mm (0.008 inch) 

scientia non olet · About LEMON Manuals