LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (3.0L Engine (Service Information) - Coupe) >> Rocker Arms And Camshaft >> Removal And Installation >> Installation Service Points >> >> A << Camshaft Installation

>> A << Camshaft Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply engine oil to the camshaft journals and cams.
  2. The camshaft for the right bank has a slit for driving the distributor at the rear end. The camshaft for the left bank has no slit. Be careful to install the correct camshaft in the correct position.
    Fig 1: Installing Correct Camshaft In Correct Position
    G04538416Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals