LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (3.0L Engine (Service Information) - Coupe) >> Piston And Connecting Rod >> Removal And Installation >> Removal Service Points >> << A >> Connecting Rod Cap Removal

<< A >> Connecting Rod Cap Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mark the cylinder number on the side of the connecting rod big end for correct reassembly.
  2. Keep the removed connecting rods, caps, and bearings in order according to the cylinder number.
    Fig 1: Identifying Cylinder Number
    G04538475Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals