LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (3.0L Engine (Service Information) - Coupe) >> Oil Pan And Oil Pump >> Removal And Installation >> Installation Service Points >> >> H << Engine Oil Pressure Switch

>> H << Engine Oil Pressure Switch

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Be careful not to block the oil passage with sealant.
  1. Apply sealant (3M™ AAD Part number 8672 or equivalent) to the thread of engine oil pressure switch.
  2. Tighten the switch to the specified torque.

    Tightening torque: 10 +/- 2 N.m (87 +/- 17 in-lb) 

    Fig 1: Applying Sealant
    G04538470Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals