LEMON Manuals
: Even more car manuals for everyone
Home
>>
Chrysler
>>
2001
>>
Sebring LX, 2D Convertible
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 52 (3.0L Engine (Service Information) - Coupe)
>>
Cylinder Head And Valves
>>
Removal And Installation
>>
Notes
Removal And Installation: Notes
WARNING:
This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Cylinder Head And Valves
Courtesy of DAIMLERCHRYSLER CORPORATION
Required Special Tools:
MD998051: Cylinder Head Bolt Wrench
MD998772: Valve Spring Compressor
MD998774: Valve Stem Seal Installer