LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (3.0L Engine (Service Information) - Coupe) >> Cylinder Head And Valves >> Removal And Installation >> Installation Service Points >> >> B << Valve Spring Installation

>> B << Valve Spring Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Install the valve spring with its ID color painted end (larger pitch side) upward (toward the valve spring retainer).

Fig 1: Installing Valve Spring With ID Color
G04538440Courtesy of DAIMLERCHRYSLER CORPORATION