LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (3.0L Engine (Service Information) - Coupe) >> Cylinder Head And Valves >> Inspection >> Valve Seat Reconditioning Procedure

Valve Seat Reconditioning Procedure

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before correcting the valve seat, check for the clearance between the valve guide and valve and, if necessary, replace the valve guide.
  2. Using the special tool or a seat grinder, correct to obtain the specified seat width and angle.
  3. After correcting the valve seat, lap the valve and valve seat using lapping compound. Then, check the valve stem projection.
    Fig 1: Checking Clearance Between Valve Guide And Valve
    G04538451Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals