Special Tools
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS REFERENCE
| TOOL | TOOL NUMBER AND NAME | REPLACED BY MILLER TOOL NUMBER | APPLICATION |
|---|---|---|---|
| MD998443 Lash adjuster holder (8) |
MD998443 | Supporting of the lash adjuster to prevent it from falling when rocker shaft assembly is removed or installed | |
| MD998713 Camshaft oil seal installer |
MD998713 | Installation of camshaft oil seal | |
| MD998442 Air bleed wire |
N/A | Air bleed of lash adjuster | |
| MB991654 Cylinder head bolt wrench (12) |
N/A | Removal and installation of cylinder head bolt | |
| MD998735 Valve spring compressor |
MD998735-01 | Compression of valve spring | |
| MD998772 Valve spring compressor |
MD998772-A | Compression of valve spring | |
| MD998774 Valve steam seal installer |
MD998774 | Installation of valve steam seal | |
| MD998727 Oil pan remover |
N/A | Removal of oil pan | |
| MD998162 Plug wrench |
MD998162 | Removal and installation of front case cap plug | |
| MD998783 Plug wrench retainer |
N/A | ||
| MD998371 Silent shaft bearing puller |
MD998371 | Removal of counterbalance shaft front bearing | |
| MD998372 Silent shaft bearing puller |
MD998372 | Removal of counterbalance shaft rear bearing | |
| MB991603 Bearing installer stopper |
MB991603 | Removal and installation of rear bearing | |
| MD998705 Silent shaft bearing installer |
MD998373 | Installation of counterbalance shaft bearing | |
| MD998285 Crankshaft front oil seal guide |
MD998285 | Installation of crankshaft front oil seal | |
| MD998375 Crankshaft front oil seal installer |
C-3095-A | ||
| MD998780 Piston pin setting tool |
N/A | Removal and installation of piston pin | |
| MB990938 Handle |
C-4171 | Installation of crankshaft rear oil seal | |
| MD998776 Crankshaft rear oil seal installer |
MD998776-A |