LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (2.4L Engine (Service Information) - Coupe) >> Front Case And Oil Pump >> Removal And Installation >> Installation Service Points >> >> N << Sealant Application To Engine Oil

>> N << Sealant Application To Engine Oil

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Be careful not to block the oil passage with sealant.
  1. Apply the sealant (3M™ AAD Part number 8672 or equivalent) to the threads of the engine oil pressure switch.
  2. Tighten the switch to the specified torque.

    Tightening torque: 19 +/- 3 N.m (14 +/- 2 ft-lb) 

    Fig 1: Applying Sealant To Threads Of Engine Oil Pressure Switch
    G04538272Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals