LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (2.4L Engine (Service Information) - Coupe) >> Front Case And Oil Pump >> Removal And Installation >> Installation Service Points >> >> F << Crankshaft Front Oil Seal Installation

>> F << Crankshaft Front Oil Seal Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Using special tool MD998375, install the crankshaft front oil seal into the front case.

Fig 1: Installing Crankshaft Front Oil Seal Using Special Tool
G04538261Courtesy of DAIMLERCHRYSLER CORPORATION