LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (2.4L Engine (Service Information) - Coupe) >> Front Case And Oil Pump >> Removal And Installation >> Installation Service Points >> >> D << Counterbalance Shaft Oil Seal Installation

>> D << Counterbalance Shaft Oil Seal Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Using a suitable socket wrench, install the counterbalance shaft oil seal into the front case.

Fig 1: Installing Counterbalance Shaft Oil Seal Special Tool
G04538259Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals