LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (2.4L Engine (Service Information) - Coupe) >> Front Case And Oil Pump >> Inspection >> Oil Pump

Oil Pump

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the oil pump gears to the front case and rotate it to ensure smooth rotation with no looseness.
  2. Ensure that there is no ridge wear on the contact surface between the front case and the gear surface of the oil pump cover.
  3. Check the side clearance.

    Standard value: 

    Drive gear 0.08 - 0.14 mm (0.004 - 0.006 inch) 

    Driven gear 0.06 - 0.12 mm (0.003 - 0.004 inch) 

    Fig 1: Assembling Oil Pump Gears To Front Case Using Special Tool
    G04538274Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals