LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (2.4L Engine (Service Information) - Coupe) >> Cylinder Head And Valves >> Removal And Installation >> Removal Service Points >> << B >> Retainer Lock Removal

<< B >> Retainer Lock Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set special tool MD998735 or MD998772 as illustrated to compress the valve spring. Remove the retainer lock.
  2. Relieve the spring tension and remove the valve, retainer, spring, etc. Store removed valves, springs, and other parts, tagged to indicated their cylinder number and location for assembly.
    Fig 1: Removing Retainer Lock Using Special Tool
    G04538228Courtesy of DAIMLERCHRYSLER CORPORATION
    Fig 2: Identifying Special Tool MD998772
    G04538229Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals