LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (2.4L Engine (Service Information) - Coupe) >> Cylinder Head And Valves >> Inspection >> Valve Spring

Valve Spring

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the free height of the spring. If it is less than the limit, replace.

    Standard value: 50.8 mm (2.00 inches) 

    Minimum limit: 49.8 mm (1.96 inches) 

  2. Measure the squareness of the spring. If it exceeds the limit, replace.

    Standard value: 2 degree angle or less 

    Limit: 4 degree angle 

    Fig 1: Measuring Free Height Of Spring
    G04538240Courtesy of DAIMLERCHRYSLER CORPORATION