LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (2.4L Engine (Service Information) - Coupe) >> Cylinder Head And Valves >> Inspection >> Valve Seat

Valve Seat

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Assemble the valve, then measure the valve stem projection between the end of the valve stem and the spring seating surface. If the measurement exceeds the specified limit, replace the valve seat.

Standard value: 49.30 mm (1.941 inches) 

Limit: 49.80 mm (1.960 inches) 

Fig 1: Measuring Valve Stem Projection Between End Of Valve Stem And Spring Seating Surface
G04538242Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals