LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Body - Exterior - Coupe) >> Sunroof >> On-Vehicle Service >> Sunroof Fit Adjustment

Sunroof Fit Adjustment

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully close the roof lid glass.
  2. Fully open the sunshade.
  3. Loosen the roof lid glass assembly mounting screws (four), and then slide the roof lid glass assembly along the slot in the roof lid glass assembly to adjust the height of the roof lid glass. Ensure that uniform space between the roof lid glass and the body is secured in circumference.
  4. After adjustment, check to be sure that the sunroof operates smoothly.
    Fig 1: Loosening Roof Lid Glass Assembly Mounting Screws
    G04538603Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals