INSPECTION PROCEDURE 2: Uneven Body Clearance: Diagnosis

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

STEP 1. Check the apertures between the hood and the adjacent body panels.
Q: Are the apertures between the hood and the adjacent body panels aligned correctly?

YES : Go to Step 2.

NO: Adjust the hood (Refer to HOOD ). Then go to Step 2.
STEP 2. Retest the system.
Q: Is the clearance with the body even?

YES : The procedure is complete.

NO: Return to Step 1.