LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Air Bag Restraint Systems) >> Diagnostics >> Using DRB

Using DRB

WARNING: This page is about a different car, the 2001 Dodge Grand Caravan, 2001 Dodge Caravan, 2001 Chrysler Voyager, and 2001 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Refer to DRB user guide for instructions and assistance with reading DTCs and other DRB functions. Under normal operation DRB will display one of only 2 error messages: User-Requested WARM boot or User-Requested COLD boot. If DRB should display any other error message, record entire display and contact manufacturer.
  2. If DRB does not power-up, check for loose cable connections or a bad cable. Check vehicle battery voltage (data link connector terminal No. 16). A minimum of 11 volts is required to adequately power DRB.
  3. If all connections are proper between DRB and vehicle or other devices, and vehicle battery is fully charged, an inoperative DRB may be result of faulty cable or vehicle wiring. Go to TEST 1C: VEHICLE COMMUNICATION PROBLEMS  under VEHICLE COMMUNICATIONS.
scientia non olet · About LEMON Manuals