How To Replace The Transmitter Battery
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not allow water or dust stick to enter the inside of the transmitter when it is open. Also, do not touch the precision electronic device.
- Remove the set screw to remove the battery from the transmitter.
- Install a battery with its (+) side face-down.
Battery required for replacement: Coin type battery CR2032
- Insert the claw first and assemble the transmitter.
- Verify that the keyless entry system operates.