LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Power Door Locks - Coupe) >> On-Vehicle Service >> Enabling/Disabling The ANSWERBACK Function >> Enabling/Disabling The Hazard ANSWERBACK Function >> Enabling/Disabling The Horn ANSWERBACK Function

Enabling/Disabling The Horn ANSWERBACK Function

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

< When only the transmitter is used > 

  1. Remove the ignition key.
  2. Push the UNLOCK switch while holding the LOCK switch pushed for four to ten seconds.
  3. If the LOCK switch and UNLOCK switch are released at the same time, the ETACS-ECU tone alarm will sound, indicating that the horn answerback function can be enabled or disabled.
    • Enable the horn answerback function*: The ETACS-ECU tone alarm will sound once. 
    • Disable the horn answerback function: The ETACS-ECU tone alarm will sound twice. 
    • Enable the horn answerback function**: The ETACS-ECU tone alarm will sound three times. 
NOTE: *: The horn will sound if the doors are locked with the keyless entry system.
NOTE: **: The horn will sound if the doors are already locked and the keyless entry system is used.
scientia non olet · About LEMON Manuals