Enabling/Disabling The Rolling Lock Function
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Turning the rolling lock function ON and OFF The rolling lock function can be turned on and off by the following operations:
- Set the vehicle to the following condition:
- Insert key into ignition key cylinder and set the ignition switch to the "LOCK" (OFF) position.
- Set all the door closed.
- Set and keep center door lock switch to the side "LOCK" for about 10 seconds to switch the rolling lock function ON/OFF. At this time, ETACS-ECU makes buzzer sound. (If switched ON, buzzer sounds once. If switched OFF, buzzer sounds twice.)