Fastener Tightening Specifications
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| A/C pipe mounting bolt (heater/cooler unit side) | 4.9 +/- 1.0 N.m (44 +/- 8 in-lb) |
| A/C pipe mounting bolt (condenser side) | 4.9 +/- 1.0 N.m (44 +/- 8 in-lb) |
| A/C pipe mounting nut (suction hose side) | 13 +/- 2 N.m (109 +/- 21 in-lb) |
| Discharge hose mounting bolt (compressor side) | 25 +/- 4 N.m (18 +/- 4 ft-lb) |
| Discharge hose mounting nut (condenser side) | 4.9 +/- 1.0 N.m (44 +/- 8 in-lb) |
| Suction hose mounting bolt (compressor side) | 25 +/- 4 N.m (18 +/- 4 ft-lb) |