LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (HVAC Systems - Coupe) >> Compressor Assembly And Tension Pulley >> Removal And Installation >> Removal Service Points >> << A >> Drive Belt Removal

<< A >> Drive Belt Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the nut "A" for holding.
  2. Loosen the bolt "B" for adjustment.
  3. Remove the drive belt.
scientia non olet · About LEMON Manuals