LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (HVAC Systems - Coupe) >> Compressor Assembly And Tension Pulley >> Inspection >> Revolution Pick-up Sensor Check

Revolution Pick-up Sensor Check

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Measure the resistance between terminals 1 and 3. Check that the measured value is at the standard value.

Standard value: 405 +/- 35 Ω when the ambient air temperature is 20°C (68°F) 

Fig 1: Measuring Resistance Between Terminals 1 And 3
G04538762Courtesy of DAIMLERCHRYSLER CORPORATION