LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (HVAC Systems - Coupe) >> Compressor Assembly And Tension Pulley >> A/C Compressor Clutch >> Assembly Service Points >> >> E << Air Gap Adjustment

>> E << Air Gap Adjustment

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Check whether or not the air gap of the clutch is within the standard value.

Standard value: 

< 2.4L engine > 0.3 - 0.5 mm (0.012 - 0.020 inch) 

< 3.0L engine > 0.4 - 0.6 mm (0.016 - 0.024 inch) 

NOTE: If there is a deviation of the air gap from the standard value, make the necessary adjustment by adjusting the number of shims.
Fig 1: Adjusting Air Gap
G04538769Courtesy of DAIMLERCHRYSLER CORPORATION