Washer Fluid Level Switch Check
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Connect a circuit tester to the connector of the level sensor as shown in illustration.
TESTER CONNECTION SPECIFIED CONDITION CHART
| FLOAT POSITION |
TESTER CONNECTION |
SPECIFIED CONDITION |
| Float |
Move from up to down |
1 - 2 |
Less than 2 ohms |
| Move from down to up |
Open circuit |
Courtesy of DAIMLERCHRYSLER CORPORATION