LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Overhaul - Automatic Transmission - Coupe) >> Specifications >> Adjusting Plate, Snap Ring And Spacers

Adjusting Plate, Snap Ring And Spacers

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Thrust washer (For adjustment of input shaft end play) 

IDENTIFICATION SYMBOL AND THICKNESS SPECIFICATION

THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO. THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO.
1.8 (0.071) 18 MD754509 2.4 (0.094) 24 MD753793
2.0 (0.079) 20 MD754508 2.6 (0.102) 26 MD753794
2.2 (0.087) 22 MD754507 2.8 (0.110) 28 MD753795

Snap ring < F4A42 > (For adjustment of underdrive clutch and overdrive clutch end play) 

IDENTIFICATION SYMBOL AND THICKNESS SPECIFICATION

THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO. THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO.
1.6 (0.063) None MD759666 2.4 (0.094) Brown MD752129
1.7 (0.067) Blue MD759667 2.5 (0.098) None MD752130
1.8 (0.071) Brown MD759668 2.6 (0.102) Blue MD752131
1.9 (0.075) None MD752124 2.7 (0.106) Brown MD752132
2.0 (0.079) Blue MD752125 2.8 (0.110) None MD752133
2.1 (0.083) Brown MD752126 2.9 (0.114) Blue MD752134
2.2 (0.087) None MD752127 3.0 (0.118) Brown MD754680
2.3 (0.091) Blue MD752128      

Snap ring < F4A51 > (For adjustment of underdrive clutch and overdrive clutch end play) 

IDENTIFICATION SYMBOL AND THICKNESS SPECIFICATION

THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO. THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO.
1.6 (0.063) Brown MD759960 2.4 (0.094) Blue MD750845
1.7 (0.067) None MD759961 2.5 (0.098) Brown MD750846
1.8 (0.071) Blue MD759962 2.6 (0.102) None MD750847
1.9 (0.075) Brown MD759963 2.7 (0.106) Blue MD750848
2.0 (0.079) None MD750841 2.8 (0.110) Brown MD750849
2.1 (0.083) Blue MD750842 2.9 (0.114) None MD750850
2.2 (0.087) Brow MD750843 3.0 (0.118) Blue MD750851
2.3 (0.091) None MD750844      

Snap ring < F4A42 > (For adjustment of low-reverse brake and second brake reaction plates end play) 

IDENTIFICATION SYMBOL AND THICKNESS SPECIFICATION

THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO. THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO.
2.2 (0.087) Blue MD754786 2.4 (0.094) None MD758240
2.3 (0.091) Brown MD754787 2.5 (0.098) Blue MD758241

Snap ring < F4A51 > (For adjustment of low-reverse brake and second brake reaction plates end play) 

IDENTIFICATION SYMBOL AND THICKNESS SPECIFICATION

THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO. THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO.
2.2 (0.087) None MD756784 2.4 (0.094) Brown MD758552
2.3 (0.091) Blue MD756785 2.5 (0.098) None MD758553

Pressure plate < F4A42 > (For adjustment of low-reverse brake and second brake end play) 

IDENTIFICATION SYMBOL AND THICKNESS SPECIFICATION

THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO. THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO.
1.6 (0.063) L MD759567 2.4 (0.094) 4 MD759417
1.8 (0.071) 1 MD759414 2.6 (0.102) 6 MD759418
2.0 (0.079) 0 MD759415 2.8 (0.110) 8 MD759419
2.2 (0.087) 2 MD759416 3.0 (0.118) D MD759420

Pressure plate < F4A51 > (For adjustment of low-reverse brake and second brake end plays) 

IDENTIFICATION SYMBOL AND THICKNESS SPECIFICATION

THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO. THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO.
1.6 (0.063) F MD759568 2.4 (0.094) B MD759428
1.8 (0.071) E MD759425 2.6 (0.102) A MD759429
2.0 (0.079) D MD759426 2.8 (0.110) 0 MD759430
2.2 (0.087) C MD759427 3.0 (0.118) 1 MD759431

Snap ring < F4A42 > (For adjustment of reverse clutch end play) 

IDENTIFICATION SYMBOL AND THICKNESS SPECIFICATION

THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO. THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO.
1.6 (0.063) None MD761085 2.3 (0.091) Blue MD752141
1.7 (0.067) Blue MD761086 2.4 (0.094) Brown MD752142
1.8 (0.071) Brown MD761087 2.5 (0.098) None MD752143
1.9 (0.075) None MD752137 2.6 (0.102) Blue MD752144
2.0 (0.079) Blue MD752138 2.7 (0.106) Brown MD752145
2.1 (0.083) Brown MD752139 2.8 (0.110) None MD752146
2.2 (0.087) None MD752140      

Snap ring < F4A51 > (For adjustment of reverse clutch end play) 

IDENTIFICATION SYMBOL AND THICKNESS SPECIFICATION

THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO. THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO.
1.6 (0.063) None MD761008 2.3 (0.091) Blue MD756693
1.7 (0.067) Blue MD761089 2.4 (0.094) Brown MD756694
1.8 (0.071) Brown MD761090 2.5 (0.098) None MD756695
1.9 (0.075) None MD758947 2.6 (0.102) Blue MD756696
2.0 (0.079) Blue MD756690 2.7 (0.106) Brown MD756697
2.1 (0.083) Brown MD756691 2.8 (0.110) None MD756698
2.2 (0.087) None MD756692      

Snap ring (For adjustment of reverse clutch and overdrive clutch spring retainer end plays) 

IDENTIFICATION SYMBOL AND THICKNESS SPECIFICATION

THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO. THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO.
1.48 (0.0583) Brown MD755600 1.58 (0.0622) Blue MD755602
1.53 (0.0602) None MD755601 1.63 (0.0642) Brown MD755603

Thrust race (For adjustment of underdrive sun gear end play) 

IDENTIFICATION SYMBOL AND THICKNESS SPECIFICATION

THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO. THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO.
1.6 (0.063) - MD707267 2.2 (0.087) - MD723065
1.7 (0.067) - MD759681 2.3 (0.091) - MD754796
1.8 (0.071) - MD723064 2.4 (0.094) - MD724358
1.9 (0.075) - MD754794 2.5 (0.098) - MD754797
2.0 (0.079) - MD707268 2.6(0.102) - MD754798
2.1 (0.083) - MD754795      

Spacer (For adjustment of output shaft preload) 

IDENTIFICATION SYMBOL AND THICKNESS SPECIFICATION

THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO. THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO.
1.88 (0.0740) 88 MD756579 2.36 (0.0929) 36 MD756591
1.92 (0.0756) 92 MD756580 2.40 (0.0945) 40 MD756592
1.96 (0.0772) 96 MD756581 2.44 (0.0961) 44 MD756593
2.00 (0.0787) 00 MD756582 2.48 (0.0976) 48 MD756594
2.04 (0.0803) 04 MD756583 2.52 (0.0992) 52 MD756595
2.08 (0.0819) 08 MD756584 2.56 (0.1008) 56 MD756596
2.12 (0.0835) 12 MD756585 2.60 (0.1024) 60 MD756597
2.16 (0.0850) 16 MD756586 2.64 (0.1039) 64 MD756598
2.20 (0.0866) 20 MD756587 2.68 (0.1055) 68 MD756599
2.24 (0.0882) 24 MD756588 2.72(0.1071) 72 MD760685
2.28 (0.0898) 28 MD756589 2.76 (0.1087) 76 MD760686
2.32 (0.0913) 32 MD756590      

Spacer (For adjustment of differential case preload) 

IDENTIFICATION SYMBOL AND THICKNESS SPECIFICATION

THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO. THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO.
0.71 (0.0280) 71 MD754475 1.07 (0.0421) 07 MD720945
0.74 (0.0291) 74 MD727660 1.10 (0.0433) J MD710454
0.77 (0.0303) 77 MD754476 1.13 (0.0445) D MD700270
0.80 (0.0315) 80 MD727661 1.16 (0.0457) K MD710455
0.83 (0.0327) 83 MD720937 1.19 (0.0469) L MD710456
0.86 (0.0339) 86 MD720938 1.22 (0.0480) G MD700271
0.89 (0.0350) 89 MD720939 1.25 (0.0492) M MD710457
0.92 (0.0362) 92 MD720940 1.28 (0.0504) N MD710458
0.95 (0.0374) 95 MD720941 1.31 (0.0516) E MD706574
0.98 (0.0386) 98 MD720942 1.34 (0.0528) O MD710459
1.01 (0.0398) 01 MD720943 1.37 (0.0539) P MD710460
1.04 (0.0409) 04 MD720944      

Spacer (For adjustment of backlash between differential side gear and pinion) 

IDENTIFICATION SYMBOL AND THICKNESS SPECIFICATION

THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO. THICKNESS mm (in) IDENTIFICATION SYMBOL PART NO.
0.75 - 0.82 (0.0295 - 0.0323) - MD722986 1.01-1.08 (0.0398-0.0425) - MD722982
0.83 - 0.92 (0.0327 - 0.0362) - MD722985 1.09-1.16 (0.0429 - 0.0457) - MD722983
0.93-1.00 (0.0366 - 0.0394) - MD722984      
scientia non olet · About LEMON Manuals