LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Overhaul - Automatic Transmission - Coupe) >> Planetary Gear >> Disassembly And Assembly >> Assembly Service Points >> >> A << Thrust Bearing Number 4 And Thrust Bearing Number 3 Installation

>> A << Thrust Bearing Number 4 And Thrust Bearing Number 3 Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Use care to install the thrust bearings in the correct direction.

Check the installation direction of thrust bearings number 3 and 4, and install them as shown.

Fig 1: Installing Direction Of Thrust Bearings Number 3 And 4
G04539129Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals