LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Overhaul - Automatic Transmission - Coupe) >> Output Shaft >> Disassembly And Assembly >> Disassembly Service Points >> << A >> Transfer Driven Gear Removal

<< A >> Transfer Driven Gear Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Support the transfer driven gear with general service tool or special tool MD998917 < F4A42 >, and then set them on the press.
  2. Push down on the output shaft with the press to remove the transfer driven gear.
    Fig 1: Supporting Transfer Driven Gear With General Service Tool
    G04539134Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals