LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Cruise Control Systems - Coupe) >> Auto-Cruise Control System Diagnosis >> Symptom Procedures >> INSPECTION PROCEDURE 4: When the Selector Lever is Moved to "N" Range, Auto-cruise Control is not Cancelled. < A/T > >> Circuit Operation

Circuit Operation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

This circuit transmits the "N" or "P" position signal of the transmission range switch to the auto-cruise control-ECU. When the transmission range switch is at the "N" or "P" position, auto-cruise control-ECU terminal number 13 will receives 0 volt.

scientia non olet · About LEMON Manuals