LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Simplified Wiring System (SWS) - Coupe) >> SWS Diagnosis >> Symptom Procedures >> INSPECTION PROCEDURE O-7: The driver's seat belt switch is not sent to the ETACS-ECU. >> Technical Description (Comment)

Technical Description (Comment)

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

The driver's seat belt switch input signal is used to operate the following functions; seat belt tone alarm function, seat belt warning light. If the input signal is an error, these functions will not work normally.

scientia non olet · About LEMON Manuals