LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Simplified Wiring System (SWS) - Coupe) >> SWS Diagnosis >> Symptom Procedures >> INSPECTION PROCEDURE O-1: The ignition switch (ACC) signal is not sent to the ETACS-ECU. >> Technical Description (Comment)

Technical Description (Comment)

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

The ignition switch (ACC) input signal is used to operate the following devices or functions:

If the signal fails, these devices or functions will not work normally.

scientia non olet · About LEMON Manuals