LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Simplified Wiring System (SWS) - Coupe) >> SWS Diagnosis >> Symptom Procedures >> INSPECTION PROCEDURE N-3: Theft-alarm system: Headlights (high-beam) do not flash when the theft-alarm system is triggered. >> Diagnosis

INSPECTION PROCEDURE N-3: Theft-alarm system: Headlights (high-beam) do not flash when the theft-alarm system is triggered.: Diagnosis

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. STEP 1. Verify the headlight (high-beam) operation. 

    Q: Do the headlights (high-beam) illuminate normally? 

    YES  : Go to Step 2.

    NO:  Solve the problem first. Refer to SYMPTOM CHART  .

  2. STEP 2. Replacement of ECU 
    1. Replace the ETACS-ECU.
    2. The headlights (high-beam) should flash when the theft-alarm system is triggered.

    Q: Do the headlights (high-beam) flash normally by the theft-alarm system? 

    YES  : No action is necessary and testing is complete.

    NO:  Replace the front-ECU. The headlights (high-beam) should flash when the theft-alarm system is triggered.