Technical Description (Comment)
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
The ETACS-ECU illuminates the low washer fluid level warning light according to the input signals from the following switches:
- Ignition switch (IG1)
- Windshield washer fluid level switch
If the low washer fluid level warning light does not illuminate, the relevant input signal circuit, the combination meter (low washer fluid level warning light bulb or printed-circuit board) or the ETACS-ECU may be defective.