Removal & Installation (NV T350)
WARNING: This page is about a different car, the 2002 Dodge Stratus, 2002 Dodge Neon, 2002 Chrysler Sebring, 2002 Chrysler PT Cruiser, and 2002 Chrysler Neon. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Information for F5M42, F5M51 & NV T850 is not provided by manufacturer.
Raise and support vehicle. Disconnect sensor connector. Remove retaining bolt and pull vehicle speed sensor from transaxle. See Fig 1 . To install sensor, reverse removal procedure. Tighten bolt to specification. See TORQUE SPECIFICATIONS .