LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Fuel Supply System - Coupe) >> Fuel Supply >> Fuel Tank >> Fuel Tank Differential Pressure Sensor Check

Fuel Tank Differential Pressure Sensor Check

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the fuel tank differential pressure sensor connector and connect special tool MB991348 between the terminals of the disconnected connector.
  2. Turn the ignition switch to "ON" and measure the output voltage between terminals 2 and 3.

    Standard value: 2.0 - 3.0 V 

    Fig 1: Checking Fuel Tank Differential Pressure Sensor
    G04545390Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals