INSPECTION PROCEDURE 2: Accelerator Pedal Operation not Smooth (Over Acceleration): Diagnosis
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- STEP 1. Check the accelerator pedal.
Q: Is the accelerator pedal loose?
YES : Tighten, then go to Step 4.
NO: Go to Step 2.
- STEP 2. Check the accelerator cable wiring.
Q: Is the accelerator cable routing bent sharply?
YES : Repair, then go to Step 4.
NO: Go to Step 3.
- STEP 3. Check the accelerator cable lubricant.
Q: Is the accelerator cable lubricated sufficiently?
YES : There is no action to be taken.
NO: Refill or replace the lubricant, then go to Step 4.
- STEP 4. Check symptom.
Q: Does the accelerator pedal work normally?
YES : The procedure is complete.
NO: Return to Step 1.