Fastener Tightening Specification
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
FASTENER TIGHTENING SPECIFICATION
| ITEM | SPECIFICATION |
|---|---|
| Camshaft position sensor bolt< 2.4L ENGINE > | 8.8 +/- 1.0 N.m (78 +/- 9 in-lb) |
| Crankshaft position sensor bolt< 2.4L ENGINE > | 8.8 +/- 1.0 N.m (78 +/- 9 in-lb) |
| Crankshaft position sensor bolt< 3.0L ENGINE > | 8.8 +/- 1.0 N.m (78 +/- 9 in-lb) |
| Distributor nut< 3.0L ENGINE > | 13 +/- 2 N.m (109 +/- 21 in-lb) |
| Ignition coil bolt< 2.4L ENGINE > | 9.8 +/- 2.0 N.m (87 +/- 17 in-lb) |
| Knock sensor | 23 +/- 2 N.m (16 +/- 2 ft-lb) |
| Power steering oil pump assembly bolt< 2.4L ENGINE > | 29 +/- 4 N.m (21 +/- 4 ft-lb) |
| Power steering oil pump bracket bolt< 2.4L ENGINE > | 49 +/- 10 N.m (36 +/- 7 ft-lb) |
| Pressure hose and tube connection bolt< 2.4L ENGINE > | 12 +/- 2 N.m (100 +/- 22 in-lb) |
| Spark plug | 25 +/- 4 N.m (18 +/- 4 ft-lb) |