LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Ignition System - Coupe) >> On-Vehicle Service >> Ignition Coil Check < 3.0L Engine >

Ignition Coil Check < 3.0L Engine >

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measurement of the primary coil resistance

    Measure the resistance between connector terminals 1 and 2 of the distributor.

    Standard value: 0.56 - 0.68 Ω 

  2. Measurement of the secondary coil resistance Measure the resistance between the high-voltage terminal and connector terminal 1.

    Standard value: 9.4 - 12.8 kΩ 

    Fig 1: Identifying High Voltage Terminals
    G04537451Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals